A jewelry display case should fit the way you present and handle your merchandise. Ring trays, necklace busts, bracelet stands, and risers all take up space, and their arrangement affects how customers see the collection and how staff serve them.
Before choosing a case, build a layout using the displays you actually plan to use. Then compare that arrangement with the showcase’s confirmed usable interior dimensions and access opening. Here is how to work through the measurements.
Measure each display with merchandise in place
Record the overall width, depth, and height of each tray, stand, or bust. Include raised edges, handles, feet, and any jewelry extending beyond the display. A necklace bust’s base footprint and its loaded height are separate measurements; both matter.
Measure risers with everything stacked as it will appear in the case. If a ring tray will sit on a platform, record the combined height. Note quantities, too, so the layout reflects the collection you intend to present.
Build a layout before choosing the case width
Arrange your trays and risers on a table or mark their outlines on paper at full size. Leave room between groups so individual pieces remain easy to see. Include space for labels and any featured merchandise that needs a larger footprint.
For example, three trays measuring 12 inches wide need 36 inches when placed side by side. Adding two 1-inch gaps between trays and 1 inch at each outer edge creates a 40-inch-wide arrangement. Those gaps are illustrative planning choices, not a required spacing standard.
Measure the finished layout from front to back as well. Send both dimensions to the manufacturer and ask which case provides that usable deck area. Do not assume a case’s listed overall width and depth equal its clear display surface; glass, framing, and other components can affect the available space.
Check the height of the complete arrangement
Measure from the surface supporting the display to the highest point of the jewelry or fixture. Allow room above it for handling and check whether lights, shelves, or hardware project into that space.
Listed glass height alone does not confirm the clear height at every point inside a showcase. Ask for the usable clearance in the proposed configuration. A taller necklace display may need a different glass section or shelf arrangement than shallow ring trays.
Confirm that trays can pass through the opening
An arrangement can fit inside a case and still be awkward to load or remove. Compare your largest tray or display with the clear door opening, including its width and height. With sliding doors, confirm how much of the rear opening is accessible at one time.
Consider the motion involved in lifting a loaded tray out. Staff need space to grip it, raise it, and withdraw it without catching a riser or disturbing nearby jewelry. Ask about compatible access options, such as pull-out decks or alternative doors, and confirm the space needed behind the case to use them.
Review visibility and lighting with the layout in place
View the mock-up from the customer side and from staff positions. Tall busts can obscure smaller items behind them, while several raised platforms can interrupt sightlines across the case.
Review lighting placement alongside the proposed arrangement. A display that fits physically may cast a shadow over another group. Share photographs of the mock-up so lighting, display heights, and access can be considered together. Tecno Display’s product information outlines lighting and access options to discuss for your selected model.
Send a measured plan with your quote request
Include tray dimensions and quantities, the tallest loaded display, a photograph or sketch of the layout, and the overall space available in your store. Identify which existing displays must be retained and which could change.
Tecno Display manufactures standard and custom jewelry display cases. Share your measurements so the team can review a suitable configuration and confirm interior clearances before you order.
Request a quote, call (800) 255-3536, or email tecno@tecnodisplay.com to discuss your jewelry showcase project.

Confirm usable display space and access clearances before choosing a jewelry showcase.