Wall display showcases are traditional and consistent in the way they are built. A top canopy, a bottom base, glass panels in the back and sides, two sliding doors in the front and metal framing to join the panels. A new concept of frameless wall display cases has been introduced slowly on the market the last couple of years. The luxury giftware industry and the jewelry trade are starting to use them in their upscale locations. The absence of vertical metal framing typical of the new wall display showcase look allows for the full vision of the products inside. The back panel of the wall showcase is made of extra thick solid wood and a deep groove is made for the back of each tempered glass shelf to fit in. Each shelf is fully inserted in the groove and strong adhesives are utilized to firmly keep it in place. The effect is surprising. It looks like the glass shelves are just suspended in the air within the large wall display showcase.
Schools are always in need of display showcases for the many areas where they have to organize documents, notices, display awards, memorabilia or artifacts. Since the free standing towers and wall display cases schools are using are placed in high traffic areas they should be built sturdy and easy to maintain. Tempered glass, high pressure laminates and high quality hardware will help in the process. They will avoid breakage of the glass and scratches on the cabinetry. Display showcases for schools have an industrial look of their own. They are what one may call generic since overtime they will be used to many ends and for different purposes. The actual trend is to build wall display cases for schools in very large size to accommodate more and more items.
Retail stores, museums and exhibit areas are using solid pedestal bases with a glass display area on top and a lockable door. Pedestal displays with lights are the most frequent. When the glass top display area is covered by a solid top canopy the one way to lit up the display is to install the electrical and light bulbs inside the top cabinet. You will also notice that some pedestal display with lights have a top all in glass. Display showcases manufacturers will then opt for LED pole lights. The light fixtures can be installed directly on the solid deck of the glass area preferably in the corners. Commonly the manufacturer will install two to four pole lights in the glass area. They will produce a sharp and focused type of lighting. Pedestal displays with lights will enhance the look and unicity of any object they showcase.
Finding quality made glass display cases is not an easy task. Most of what you see online are standard mass produced glass cases with an inexpensive industrial utility look.Most consumers and retailers have become budget driven and the response of display cases manufacturers has been less than adequate in general. All look so blend and generic. Exception ought to be made to the few domestic glass cases manufacturers left. Each of them maintains its own style, quality standards and expands continuously their line of products. They are the ones developing the new trends and setting the bar higher in the field of display cases manufacturing.
Most glass display are designed to showcase some common categories of items. They are built to be installed in specific areas such as against a wall or on top of a counter. Free standing display towers are the exception. Manufactured with wheels under the base cabinet they can be easily moved around or elevated on top of a platform for higher visibility. The retail store manager may choose to place his free standing display tower next to the front entrance of the retail space, right next to a front window, against a short angled wall or standing alone in the center of the store. Free standing display towers of similar design may also be grouped together. In this configuration they will be perfect to display different lines of collectibles or jewelry next to each other. Free standing display towers have a way to categorize and individualize the contents inside. Since glass display towers are available in square, rectangular, round and hexagonal shapes they can fit in any space that would be left useless otherwise.
Many standards can be considered when trying to gauge the overall quality of a given glass display case. However some basic criteria come into play. Quality raw materials should it be the glass, wood material or hardware are indispensable. A careful assembly by skilled craftsmen in a clean and organized environment is synonymous with quality. This involves the knowledge and proper use of the appropriate tools and machinery. A stable workforce with a strong team spirit is of great help since it will add the consistency factor to the final quality of the production. Needless to say that the rigid application of all the checks and steps of the final quality control is the ultimate guarantee that the product will reach the end user in the best condition.
Wood display showcases are always noticeable for the warmth they project within any decor, surrounding. Since they are made of wood their natural look will come out strongly. Since many stain finishes can be applied to the sanded wood surfaces the appearance of wood showcases will drastically change using one stain or another. For example the same design will much change should it be maple or cherry stained. Many styles of wood display cases are available from modern, streamline looking to the classical and ornamental group. Additionally from simple to elaborate moldings can be applied to the front face and sides of wood showcases. Crown moldings are frequent on the front and smaller patterns of square and round moldings are added here and there to harmonize the look of a wood display case. Detailing, timeless beauty, richness and warmth are the essential qualities of well made wood display cases.
As a retailer or store designer trying to source a glass display showcases manufacturer there are many options to consider. When looking for an original cabinet finish and a variety of showcases designs to achieve a specific look you should turn to a domestic glass display cases manufacturer. Their website and catalog will include different categories of glass showcases that will cover your multiple displaying needs should it be tower cases, wall showcases, jewelry showcases, cash counters and shadow boxes. For each model the manufacturer will specify the different sizes available, the options that can be added and the selection of cabinet finishes. By the same token available customization will be stated. A reliable glass manufacturer will inquire about your specific needs, what you are planning to use the showcases for, the price ranges of your different lines of merchandise. Your budget, the look and proper design you want to complete should be discussed with your experienced display case manufacturer.
Depending on the space configuration of commercial spaces cash counters should be flexible and easy to move around. They should be adaptable to all kinds of uses such as cash wraps, tables, storage units, information centers. In order to do so manufacturers are offering standard cash counters where a number of options can easily be added. Ledges, check writing areas, pull out trays, multiple open shelving, lockable storage, compartments for your computer terminals are only a few. Compact and modular cash counters versions are available to satisfy different spaces dimensions. From the small utility cash counter to the large curved and sophisticated cash wrap there are many to choose from. For structural integrity and durability pre assembled cash counters are highly recommended. A user friendly fixture is always preferable since many employees will use it over time. Cash counters in more ways than one act as a piece of furniture central to the image of the space they fit in.
The long time collector is always looking for the perfect glass trophy showcase to group the highest number of collectibles and at the same time keep them visible. A quality made trophy case will help keeping all the memorabilia secure, clean and organized. As we know the more we accumulate the hardest it is to find things. A well designed glass trophy showcase with multiple adjustable shelving will allow the collector to group specific collectibles that belong to the same collection and therefore identify them properly. A full vision trophy case with minimal cabinetry will enable any collector to showcase more items and keep them visible by the same token. Since most trophy display cases are built as wall units they can be manufactured as wide as five feet. With the addition of the LED lighting in the top canopy and on the side of the trophy case all the memorabilia and collectibles can show distinctly and to their best.
Glass display cases are large and delicate items and are to be shipped using the appropriate kind of packaging. Most companies will choose to lay the display case on a pallet and to crate it using what is called a wood skeleton packaging. Then the glass display case will be shrink wrapped to protect it from the dust and humidity. Padding and inside protection is always added to protect the cabinetry of the display fixture. This kind of crating is light, efficient and easy to dispose of once you are receiving your showcase. Since the glass panels are the most sensitive part of any display showcase it is a good idea to check first for any glass breakage upon receipt. Then you may want to have a look inside of your showcase through the clear shrink wrapped plastic. If and when all is satisfactory you should slowly dismantle your skeleton crating to free the glass display showcase. Once done it should be lifted or wheeled out of the pallet. Once on your floor you should take away the plastic shrink wrap covering the cabinet and glass portion of your new display case. Give your display fixture a good final cleanup and it should be ready to use.
Free standing tower cases are the choice when it comes to flexibility. They can fit pretty much anywhere and are available in many shapes and sizes. Some standard tower cases are all glass from top to bottom with only a thin base cabinet and a narrow top canopy. This will allow for multiple glass shelves and ample displaying. Other free standing towers are built with a tall base cabinet at the bottom with either a lockable storage compartment or open shelving. Brochures, catalogs, prospectus may be organized within the shelving of the tower case. Convention centers and receptions areas do utilize this type of free standing towers effectively. Inside the glass top half they can showcase artwork, memorabilia, commemorative items while at the bottom all the information connected to them is readily available. In this case the free standing tower has the value of an information center.
Corporate offices, institutions, retail stores are prime customers of commercial display cabinets. Open shelving, storage areas, work tables, desks, fully enclosed wall showcases are much in demand. Commercial display cabinets are pretty much always custom made. The manufacturing company in charge of the millwork will complete the project from architectural drawings or blue print. Since this category of custom cabinets is very labor intensive commercial cabinets are made of solid wood with veneers applied on the surfaces. Once assembled the commercial display cabinets will be stained to fit the décor of the space. Since the completed commercial cabinets are to fit within a space with strict limitations the accuracy of the accuracy of the craftsmanship is essential. Once the overall installation is done an expert cabinet maker will add up all the moldings wood work, While there may be some irregularities or gaps on the walls against which the commercial display cabinets are installed a professional installer will correct them at this time. The addition of wood moldings will give either a classical, antique or modern look to the custom cabinets.
Cash counters are being used by a wide range or organizations. From retail stores to showrooms, offices, reception areas there is always a need for a cash counter. Properly designed they will fill multiple purposes. A cash counter can serve as a desk, as a paperwork organizer or as the one place you settle your bills. Linear and curved cash counters are the most common looks you will see everywhere. It is important to realize that depending on your operation a cash counter should be functional and convenient. It is the one fixture you will use continuously during the day. It should fit your particular needs. For example a standard feature is to have pre drilled holes set so that your computer wiring may be easily inserted and not visible. Checks writing areas, recessed tops, drawers, pull out trays, lockable storage with shelving are some of the options that will make the everyday use of your cash counter easier and more productive. Cash counters are made to use for many years and are visible from everywhere. They are being subjected to intensive use and should be built using the highest quality materials. Pre assembled and compact cash counters are definitely the way to go. We would suggest making a list of what all your daily tasks are before purchasing the appropriate cash counter.
It takes quite a spacious retail space area to use curved jewelry showcases. You will see them in high end jewelry stores that feature luxury jewelry and watches brands. Since curved jewelry showcases are highly custom they are available in only a limited number of radiuses. This is mainly due to the high cost of getting the curved glass panels made. Typically a good showcases layout will include a succession of curved jewelry showcases of different radiuses to create an attractive free flowing environment. Cash counters and bridal jewelry showcases will be included in the assortment. Because of the curvature of the whole layout a substantial amount of space behind the curved jewelry showcases will be left free. Retail store owners will maximize this space and use it for storage and demonstration purposes. To accentuate the aesthetical beauty of a curved jewelry showcases layout manufacturers will choose to recess the cabinet below the glass area by three to four inches. In return this will give a more pronounced, distinct look to the jewelry inside the showcase.